Deep Forest Gallery
Timber and log are natural products and have characteristics that make every furniture piece unique. Most of the modern office furniture uk residents use is made from these materials. Grain variation, mineral streaks, knots, colour variation, pitch pockets as well as other markings offer a natural beauty. Timber and log that is freshly sawn contains over 50 percent moisture. It has to be dried carefully in order to reduce the moisture content to a level that allows it to acclimate to the average humidity level found in most homes.
Timber continues to exchange moisture with the atmosphere in response to alterations in the relative humidity around the furniture pieces. Air that is extremely dry will make timber lose moisture and shrink a little, but will correct itself when the humidity increases again. Reducing relative humidity's rate of change or maintaining a stable humidity level decreases the amount of movement in timber furniture. However, such movements are natural changes and do not affect the sturdiness and quality of the furniture.
Humid weather can cause drawer fronts to swell, making them difficult to open and close. Despite every care being taken to enable normal expansion, sticking of drawers can be caused by extreme conditions. A simple way of solving this is rubbing candle wax on the drawer runners and sides. The drawers will stop sticking when the air dries, since the timber will shrink.
Avoid Exposure to Direct Sunlight
Exposure of timber and log furniture to direct sunlight should be avoided. Such exposure can affect the colour by darkening or fading, or result in hairline cracks within the finish. It is advisable to arrange furniture in a way that they are not exposed to direct sunlight. The homeowner can also use window treatments for blocking out ultra violet rays. Mellowing is not considered a defect since it is natural darkening of timber.
Allow Timber Furniture to Breath
The fine lacquer finish found on furniture has to breathe in order to maintain its appearance as well as for durability. It should be exposed to the atmosphere as opposed to being covered for long periods of time. To get the best results, desktop objects like clocks and electronic equipment should be moved periodically. Accessories or any other items placed on furniture surfaces such as desks should be rotated. It is possible to avoid surface indentations through the use of felt disks under accessory items.
Abrasive particles can be removed from timber surfaces by regular dusting. It is advisable to use a soft and clean cloth like a baby nappy or an old t-shirt. Dishcloths or sponges should not be used. When dusting, accessories should be picked up and replaced gently. The cleaning cloth can be moistened softly with water in order to prevent scratching. Additionally, it will help better collect the dust and reduce static capable of attracting dust further. Moisture should not be allowed to remain on the surface. In addition to regular dusting, timber furniture appearance can be enhanced by occasional waxing or polishing.